Can I change the mixing ratio to compensate for ambient temperatures?
Never vary the ratio of resin and hardener as it [...]
Is it necessary to wear safety glasses and gloves?
Always wear safety goggles especially when mixing or painting. Splashes [...]
How do I ensure a good bond?
In order to achieve a good bond a pre-treatment is [...]
Can ebaboards be glued?
ebaboard can be glued with our specially developed adhesive. Adhesive [...]
Why does the PU component show delamination effects?
For thick-walled components which were cast in several steps it [...]
Why does the polyurethane part have sink marks?
Reasons for sink marks: 1. Shrinkage: Sink marks usually appear [...]
Why does my PU part have soft spots?
Reasons for softening in the polyurethane part: 1. Mixing ratio [...]
Why are the dimensions of the PU part smaller than those of my mould?
Every PU system will shrink during crosslinking. PU systems cure [...]
Why is the part made of polyurethane brittle?
Reasons for embrittlement: 1. The material is not sufficiently crosslinked. [...]
Is it possible to paint polyurethane?
Hard polyurethanes can be painted but the surface to be [...]
